Wednesday, October 15, 2014

Table by re-varnishing. Then set to work. Asa was the beginning of an idea that could optimize tabl


Table had stood for many years in the cellar. Humidity and the weather affects table tops and legs tooth enamel was cracked and the surface was quite rough. Needless to say, the following table is to play something difficult, if all the strength to rebound hard to accomplish. Since the table is not just stood in the rain, the plywood was still quite healthy, remove one notch to something when pārkrāmējot been tapped.
Table by re-varnishing. Then set to work. Asa was the beginning of an idea that could optimize table tops and legs the removal of old varnish and sanding using a drill and angle grinder that the whole process was prolonged for several evenings. At higher speeds polish melted Pikucis and piecepās to sandpaper and table tops. After that it all had long and dikti grind slowly, as the melted polish very poor grinding. It is best to take normal P160- P300 slīpklučus and slowly buff. Perhaps what instruments table tops and legs would be a better result, but the same table because I did not want to buy a grinder. But had to do a number of evening news, or at the movies :) This was followed by cycle aizlāpot hard surfaces caused by the defect. Unfortunately, varnished surfaces can not hide edits. I took Depo most common wood putty, which was closest to the plywood tone - ash, noslīpēju and have started to resort to painting.
A surface sufficiently smooth and strong, the varnished at least three times. Listens to specialist advice I bought a two-component varnish for parquet acid hardener that provides maximum surface hardness or wear resistance, as well as the painted surface can be sanded after drying. I must say that the varnish can not buy Depo and had to go to one of Riga Varnish and Paint Factory stores. Of course, less than the 3L no varnish is not marketed because it than as provided for parquet. For those who are not experienced with this varnish, the varnish jāpiejauc present in 8% of the acid hardener and after half an hour polish table tops and legs ready for use, and it should be used within 8h. Then for the whole table 1 m2 using the measuring cup and syringe saveidoju mixture of 100 ml and 8ml hardener. Hardener for different acid base increases the hardness of varnish. Note that the hardener should not add too much, otherwise the varnish after drying table tops and legs cracks. Given that polish extremely stinky, biting the throat and nose, then it can not under any circumstances be used in a confined space without proper equipment. Yet there are other spray products, which are not so iftīgi, using carpenters.
After painting and waiting every day sanding with slīpkluci to make the surface smoother and all painting defects smooth finish. The best thing is painted with spray, but a rare home is required to set a compressor and gun. Yet an additional problem is the choice of suitable premises, because after one painting the garage and keeping open the dust had settled, which had to be izpulēt. Well, that novus table surface table tops and legs is not ideal to be shiny and therefore not ideal for painting jāiespringst conditions. So the three evenings the whole process was repeated until able to get to the final stage.
So the result was very good and was outstanding table tops and legs anti-slip properties even with normal table tops and legs potato starch. Although I suspect that other novus tables table tops and legs after years of little jāuzfrišina table tops and legs to not look now-outlawed boric acid. I had bought Elkor Sport some of the wax-based slip "substitute", but he has one problem - it just glides right after iesmērēšanas, but the next day, and sticking to it every time to deal with the intense polishing table before the game. The benefit though is that not the usual dust on the stones, which crumble into bags and piegāna house. Another suggestion - netaupiet table tops and legs lacquering of brushes and avoid those in which the bristles come out. Traditionally, they are brushes that trades below 1 euro. Varnish dries and has enhanced painting has strong sticky and pull out the bristles. For example, this shit just sačakarēs work and will have to grind out stubborn bristle defects.
You can, of course nečakarēties and buy new and fresh table at 70 euro, but for home paspēlēšanas unprofessional level will suffice old table, which would be a pity to discard the field. Now to do is just play and play again :) After painting and sanding some more days keep a table field, because it pretty stinky.
2014 (11) September (1) June (4) Novus table surface restoration Improved compost box flag holder of the keys to lay April (2) March (2) February (2) 2013 (5) December ( 3) October (1) September table tops and legs (1)


No comments:

Post a Comment